Bambu Lab AMS – Automatic Material System

Product Features

• Multi-Colors/materials Capability
• Keep Filament Dry
• Filament Runout & Winding Detection
• AMS Filament Backup

Compatibility with the Bambu Lab X1 & P1 Series Printers

** If you plan to connect multiple AMS units, purchase the AMS Hub.** 

Make Multi-Color 3D Printing Real

Colour, the ultimate expression of emotions, is brought to you by Bambu Lab’s Automatic Material System (AMS). You can now enjoy printing freely in multiple colours and materials.

Multi-Material Printing

Applicable to most materials such as PLA, ABS, ASA, PETG, PC, etc.

Hassle-Free Support Removal

With AMS, Bambu Lab printers can use snap-away support material or dissolvable filament to minimize the pain of removing supports.

No More Filament Leftover

Without AMS, when the filament runs out, manual spool replacement interrupts printing and results in wasted filaments.

With AMS, there is a seamless transition to a new spool which keeps uninterrupted printing and minimizes waste.

Filament Backup

Your print never stops with automatic spool changing. With the AMS filament backup function, never worry about running out of filament during your sleep or absence, ensuring a seamless and uninterrupted printing process, preventing any filament waste and promoting energy efficiency.

Advanced Intelligent System

Powered by a 32-bit MCU, sensor arrays, actuators, and a smart algorithm, the AMS has reached unprecedented levels of intelligence. It expertly manages filament loading and unloading, along with efficient fault detection and recovery.

Filament Tangle Detection

When the filament at the tool head encounters resistance, it may be that the filament is tangled or the spool is stuck, AMS can detect it immediately and suspend printing to avoid air printing.

Say Goodbye to Wet Filaments

Filament that has absorbed moisture can lead to print quality issues and poor layer adhesion, or even nozzle clogging that can lead to a failed print.

Keep the Filament Dry

The AMS has an air-tight seal and with the help of desiccant material, it absorbs moisture to keep the moisture away from Filament.
A Humidity Sensor also detects the humidity inside the AMS and provides information to the user when the humidity is higher or the desiccant may need to be replaced.

For best print quality, dry filament is required.

Automatic Filament Identification

Bambu Lab filaments use RFID which is read by the AMS to automatically identify and apply the best settings for your material.

The RFID tag is synchronized automatically to Bambu Studio.

Non-Bambu Lab Filaments must be manually configured in Bambu Studio or the printer.

Support Up to 16 Colors

Each Bambu Lab AMS is composed of 4 filament slots, and up to 4 AMS can be installed in parallel and support up to 16 colours for stunning prints that truly stand out. To achieve 16-color printing, connect 4 AMS via the AMS hub

SPECIAL NOTE: * Filaments that are too soft, brittle or abrasive are not compatible with the AMS, such as Bambu PET-CF/ TPU 95A, TPE, PVA (wet), BVOH (wet), and other brands’ PET-CF/GF, PA-CF/GF, PAHT-CF/GF, etc. If you prefer to use cardboard spools, we highly recommend using a spool adapter to reduce the risk of slippage and trapped debris in the AMS.