The Creatbot D1000 3D-Printer is upgraded from the F1000 model. With a build volume of over 1000 x 1000 x 1000mm, it is the perfect machine for creating large and full-size parts, prototypes, tools, moulds, jigs & fixtures in-house. Within days you can have a fully functional high-quality prototype. CreatBot big rolls of filament of PLA, ABS, ASA, PA-CF, etc suit well for your big models without worrying about the frequent replacement of filament. All its features are manufactured to the highest standards.

The CreatBot D1000 3D-Printer was created to make industrial 3D printing of large-scale objects and prototypes as easy as possible. It is embedded with many advanced technologies for ultra-big, impressive prints. It will be your best choice with no doubt.

If you are looking for an industrial large-scale 3D printer for prototype and engineering-grade materials. If you are tired of the fragility of PLA and the deformation of ABS, try our revolutionary material UltraPA-CF. Print your large model with a big-size nozzle, in a few days, you will get an oversized model with high strength 80MPa and temperature resistance 150 °C. The best choice for your prototype verification.

One Cubic Meter Industrial Grade Large 3D Printer.

Auto-rising Dual Extruders 420 °C

D1000 is embedded with a new smart auto-rising dual-extruder kit with a hotend temperature up to 420 °C. , The hotend can be replaced to different size one fastly. it is able to print not only huge PLA water solubility materials PVA for prototypes with fastest speed but also ABS, PC, Nylon, Carbon Fiber and more performance materials for direct application. The dual-hotend is easy to maintain and affordable to replace.

Outage Restore & Filament Detection

The printer will automatically memorize the current position and save print data, lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after powering on. No trace! The printer will avoid invalid printing by stopping print and warning when filament runs out.

Linear rail and Servo motors

When it reaches 1000mm+ length, small rails have big deflection. The D1000 accurate linear rail structure is very thick and strong. It won’t deform or lose precision after print the head a million times shock.

With servo motors, with timeliness, fast response, no inertia, and no delay. closed-loop control of position overcomes the problem of losing step. heat and noise are significantly reduced. It gives the print model ultra-high performance with high speed.

Hot Chamber + Filament Dry Room

60 °C hot chamber ensures print quality for high-performance materials. The fully enclosed chamber can block all external interference. This frame also reduces noise while providing a constant temperature, ensuring that the model won’t deform.
The filament dry room provides chamber temperatures of 45 °C and 65 °C to dry 2x5kg/roll filament like PLA, nylon, PC, ABS and other materials with water absorption.

Auto Leveling Platform

Use of 100 points through the high precision servo probe to save the level of platform flatness data at the initial, through the Z-axis intelligent compensation table height in the printing process to achieve fully automatic levelling.

HEPA Air Filter

The air filter system can adsorb impurities and gases generated by printing special filaments like ABS, Nylon, and PC, more safe and environmental protection and are more suitable for houses, schools, and office spaces.

Camera Control Technology

Camera control technology allows customers to control the printing process on speed, pause, temperature, etc… with an APP remotely, which can get the best printing quality in the shortest time without failure. A very useful feature on large models and long-time printing.

CREATBOT D1000 3D-Printer

• 1000 x 1000 x 1000mm
• High resolution & speed
• Camera control technology
• Reliable 24/7
• Fully enclosed

The whole steel body not only ensures stability during printing but also greatly extends working life. The optimization and cooperation of the overall structure ensure sustainable and efficient operation. The first batch of CreatBot 3d printers with whole-steel bodies have been working for 9 years and more than 30,000 hours.

Affordable And Reliable Large 3D printer

CreatBot D1000 was created to make industrial 3d printing of large-scale objects and prototypes as easy as possible. It is an industrial 3d printer that responds to market demand and is embedded with a new smart dual extruder kit, an enclosed heated chamber, an automatic levelling system and camera control for big, impressive, prints. Camera control technology allows customers to control the printing process with an APP, which can get the best printing quality in the shortest time without failure. With a fast-heating platform and hot chamber, this high-resolution large-print workhorse produces incredible results with high-quality materials. CreatBot D1000 sets a new standard in additive manufacturing and extends the material capabilities of large-scale 3d printers, it brings the possibility to greatly reduce cost and time for more companies.

CreatBot D1000 will be your best choice no doubt, if you are looking for an industrial large-scale 3d printer for prototype and engineering-grade materials.

Most importantly, AFFORDABLE for every company!