The Creatbot D600 Pro was created to make industrial 3D printing of large-scale objects and prototypes as easy as possible.

It is embedded with many advanced technology for ultra-big, impressive, prints. It will be your best choice with no doubt, If you are looking for an industrial large-scale 3D printer for prototype and engineering-grade materials.

Affordable price plus a build size of 600*600*600mm, make it the best choice for your business. Trusted by 2000+ professional clients.

Nozzle Temperature Up To 420 °C

D600 Pro is equipped with the 4th generation 1.75mm dual extruders and hot-ends. The left extruder is equipped with 260 °C hotend, It is able to print with PLA, ABS, PC, Nylon, Carbon fibre, Flexible, etc. The right extruder 420 °C hotend is made of martensite steel, which is able to print high-performance materials. The dual hotend is replaceable, which provides more possibility on your application.

High Precision

We exclusively research and develop the extruder feeding system that supports high-speed printing, and accuracy can reach high to 0.05mm, it allows for extruding filament steadily without block.

Large Build Volume

D600 / D600 Pro print size 600*600*600mm.  Mass production means standard high quality.

Outage Restore & Filament Detection

The printer will automatically memorize the current position and save print data. Lower the platform and withdraw the filament when the power is off suddenly. It will continue to print from the last stopped point after powering on. No trace!

The printer will avoid invalid printing by stopping print and warning when filament runs out.

Linear rail and Servo motors

When it reaches 1000mm+ length, small rails have big deflection. The D1000 accurate linear rail structure is very thick and strong. It won’t deform or lose precision after printing the head a million times shock.

With servo motors, timeliness, fast response with no inertia and no delay. closed-loop control of position overcomes the problem of losing step. heat and noise are significantly reduced. It gives print models ultra-high performance with high speed.

Hot Chamber + Filament Dry Room

60°C hot chamber ensures print quality for high-performance materials. The fully enclosed chamber can block all external interference. Also this frame can reduce noise and, at the same time provide constant temperature, so that the model won’t deform.

The filament dry room provides chamber temperatures of 45°C and 65°C to dry 2*5kg/roll filament like PLA, nylon, PC, ABS and other materials with water absorption.

Auto Leveling Platform

Use of 100 points through the high precision servo probe to save the level of platform flatness data at the initial, through the Z-axis intelligent compensation table height in the printing process to achieve fully automatic levelling.

HEPA Air Filter

The air filter system can adsorb impurities and gases that are generated by printing special filaments like ABS, Nylon, and PC, more safe and environmental protection and are more suitable for houses, schools, and office spaces.