FEATURES:
- Low-flow performance and accuracy superior to any mechanical flow sensor
- No moving parts to wear out
- Dedicated fittings for simplicity
- Retainer clip automatically sets correct depth
- Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
- Simple pulse train output can be used with most signal processing modules, or sent directly to a PLC
- Available for pipe sizes 1 to 12 inch, in 316 stainless and PVC
Fittings for EX81 Insertion Magmeter Series Meters:
Required for installation |
| Catalog Numbers |
Model |
Description |
BM0001 |
EF81T-P-100 |
PVC Tee Fitting, 1 inch Diameter
Male stub end. |
BM0005 |
EF81T-P-150 |
PVC Tee Fitting, 1 1/2 inch Diameter
Male stub end. |
BM0015 |
EF81T-P-200 |
PVC Tee Fitting, 2 inch Diameter
Male stub end. |
BM0020 |
EF82S-P-300-16 |
PVC Saddle Fitting, 3 inch Diameter
Installed on 16 inch long pipe stub. |
PVC saddles are supplied with Buna-N O-rings only.
For chemical service, the O-ring must be removed and the saddle glued on to the pipe with PVC cement. |
BM0051 |
EF81T-S-100 |
304 Stainless Steel Tee Fitting, 1 inch Diameter |
BM0060 |
EF81T-S-150 |
304 Stainless Steel Tee Fitting, 1 1/2 inch Diameter |
BM0055 |
EF81T-S-200 |
304 Stainless Steel Tee Fitting, 2 inch Diameter |
BM0065 |
EF82S-B-300 |
Bronze Saddle Fitting, 3 inch Diameter |
Fittings for EX82 Insertion Electromagnetic Flowmeter Series Meters:
Required for installation |
| Catalog Numbers |
Model |
Description |
BM0105 |
EF82S-P-400 |
PVC Saddle Fitting, 4 inch Diameter |
BM0010 |
EF82S-P-600 |
PVC Saddle Fitting, 6 inch Diameter |
BM0115 |
EF82S-P-800 |
PVC Saddle Fitting, 8 inch Diameter |
PVC saddles are supplied with Buna-N O-rings only.
For chemical service, the O-ring must be removed and the saddle glued on to the pipe with PVC cement. |
BM0155 |
EF82S-B-400 |
Bronze Saddle Fitting, 4 inch Diameter |
BM0160 |
EF82S-F-600 |
Ductile Iron Saddle Fitting, 6 inch Diameter |
BM0165 |
EF82S-F-800 |
Ductile Iron Saddle Fitting, 8 inch Diameter |
BM0167 |
EF82S-F-1000 |
Ductile Iron Saddle Fitting, 10 inch Diameter |
BM0170 |
EF82W-S-400 |
316 Stainless Steel Weld Fitting, 4 inch Diameter |
BM0175 |
EF82W-S-600 |
316 Stainless Steel Weld Fitting, 6 inch Diameter |
BM0180 |
EF82W-S-800 |
316 Stainless Steel Weld Fitting, 8 inch Diameter |
| BM0185 * |
EF82W-S-1000 |
316 Stainless Steel Weld Fitting, 10 inch Diameter |
Fittings for EX83 Insertion Electromagnetic Flowmeter Series Meters:
Required for installation |
| Catalog Numbers |
Model |
Description |
BM0805 |
EF82S-F-1200 |
Ductile Iron Saddle Fitting, 12 inch Diameter |
BM0810 |
EF82W-S-1200 |
316 Stainless Steel Weld Fitting, 12 inch Diameter |
| INSERTION MAGMETER ACCESSORIES |
| Catalog Numbers |
Model |
Description |
BM0200
Discontinued |
FT420M |
Pulse & 4-20mA Output Display
Requires 12-24VDC power. Specify meter (PN# BM0200) or wall (PN# BM0210) mounted. Note: Meter mounted displays include 18 feet of cable. |
BM0210
Discontinued |
FT420W |
BM0250 |
AO55M/AO55W |
Blind 4-20ma Converter
Requires 24-36VDC power. Specify meter (PN# BM0250) or wall (PN# BM0260) mounted. Note: Meter mounted converters include 18 feet of cable. |
BM0260 |
AO55W |
|
Specifications
|
| Accuracy: |
1% of full scale |
| Output: |
Square wave pulse, opto isolated, 500 Hz @ 20 ft/sec |
| Bi-Directional: |
Direction output, opto isolated |
| Empty Pipe Detection: |
Flow defaults to zero |
| Flow Range: |
0.2 – 20 ft/sec (.06 – 6.09 m/sec) |
| Maximum Pipe Pressure: |
200 PSI (13.8 bar) |
| Maximum Temperature: |
PVC 130° F (55° C)
Stainless Steel 200° F (93° C) |
| Minimum Conductivity: |
20 microsiemens/cm |
| Power: |
12 – 24 Vdc, 250 mA minimum |
| Materials: |
|
| Mechanical: |
316 SS/PVC |
| Electrodes: |
Hastelloy |
| Electrode plate: |
PVDF |
| Housing Cast: |
powder-coated aluminum |
| O-rings: |
EPDM |
| Size: |
4 inch square; 6-7 inches total length
(10.2 cm square; 15.2 to 17.8 cm total length) |
| Weight: |
2 lbs (907g) |
|
