Global Water WL900 Radar Level Transmitter with DC Power

Global Water AQE200

Prices Start From Call for price

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Link Gulf AQE200 
WL900 Radar Level Transmitter with DC Power
Global Water AQE200 
 
Radar Level Transmitter

Catalog Number Model Description

AQE100
WL900-AC Power: 115VAC (60Hz), Enclosure: Aluminum
AQE200 * WL900-DC Power: 12 to 30 VDC, Enclosure: Aluminum

AQE300
WL901-AC Power: 115VAC (60Hz), Enclosure: Stainless Steel

AQE400
WL901-DC Power: 12 to 30 VDC, Enclosure: Stainless Steel

 

Specifications
Radar Level Transmitter Power
         AC: 115 VAC, 60 Hz (± 20%) or 230 VAC, 50 Hz (± 20%), 1.7 VA
         DC: 12 to 30 VDC, 0.07 Amps max. @ 24 VDC
Radar Level Transmitter Outputs
         Signal: 4-20 mA, 6.1 uA resolution; 750 ohms
        Communication: Optional RS232
Accuracy: ±0.25% of maximum sensor range (in air)
Frequency: 6.3 GHz (or 5.8 GHz CE)
Measurement Range: 10 inch to 50 ft (0.254 to 15.2 m)
Resolution: 0.22 in (5.7 mm)
Transmitter Power: 50 uW average
Calibration: Push-button or optional programmable
Antenna: Polypropylene over dielectric rod
Beam Angle: 12 degrees
Operating Temp: -40°C to 60°C (-40°F to 140°F)
Operating Pressure: 150 psi max
Installation Category: Class II
Process connection: 2 inch NPT
Conduit Entry:  1/2 inch NPT standard
Housing: Aluminum or 316L stainless steel
Ingress Protection: NEMA 4 (IP65)
Approvals: FCC Part 15 – low-power communication device, CE -5.8 GHz Models
Weight: 3.6Lbs (1.63Kg)
Dimensions: 4 inch diameter x 18 inch long (10cm dia. x 45.7cm long)
 
WL900 Radar Level Transmitters 
Radar level transmitters are ideal for a variety of water and wastewater applications

FEATURES:

  • Accurate, non-contact measurement
  • Works in conditions where ultrasonic is not acceptable
  • Pulse radar measurement range 10 inches to 50 ft
  • Simple push-button calibration
  • Standard 4-20mA signal output
  • Optional RS485 digital output

The WL900 Radar Level Transmitters offer a logical extension to ultrasonic devices, where application conditions are in need of non-contact liquid level measurement but ultrasonic level transmitter measurement is not acceptable.  The WL900 Radar Level Transmitters are ideal for a variety of water and wastewater applications where you have a reflective liquid that has a foaming surface, vapors, or dusty conditions beyond ultrasonic transmitter capabilities.  The Radar Level Transmitters are also unaffected by temperature, vacuums, pressure, methane, or CO2.

The WL900 Radar Level Transmitters use state-of-the-art radar pulse technology which provide accurate and reliable level measurements over their wide 10 inch to 50 foot range.  With their simple push-button calibration system, the WL900 Radar Level Transmitters are easy to set up and maintain on the bench or in the field by following simple instructions.  Simply aim the WL900 Radar Level Transmitters at your low range level set point and push the button to lock in the setting – do the same with the high level set point.  This may be done before permanently installing the Radar Level Transmitter by aiming the instrument at a wall and using a tape measure to determine your exact range.

The WL900 Radar Level Transmitter’s rugged NEMA 4 (IP65) housing is available in either aluminum or 316L stainless steel for corrosive environments.  A standard 2 inch NPT(M) process connection allows for quick and versatile installation of the Radar Level Transmitter.  The Radar Level Transmitter’s polypropylene antenna rod is virtually corrosion proof.

 




Request A Quotation...

Please fill Out Your Details & Any Special Requests