Hanna Instruments Chlorine, Free and Total, High Range Photometer with 525 nm filter and Cal Check

Hanna Instruments HI96734

AVAILABLE IN STOCK

Prices Start From Call for price

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Link Gulf HI96734
Chlorine, Free and Total, High Range Photometer with 525 nm filter and Cal Check
Hanna Instruments  HI96734 
 

Description:
Responding to the user’s requirements for analyzing high concentrations of chlorine, HANNA® offers HI96734, which permits free and total chlorine analysis up to 10.00 mg/mL. This auto-diagnostic portable photometer is dedicated to monitoring over-chlorination through to chlorinamine destruction. The advanced optical system employs a specialized tungsten lamp and a narrow band interference filter, assuring accurate readings. This instrument is equipped with Cal Check® validation function and standards to validate good performance at any time. Taking just a few short steps, the validation procedure is user-friendly and ensures that the meter is properly calibrated wherever you go. Hanna photometers use the exclusive ready-made, NiST traceable standards to verify the performance of the instrument and recalibrate if necessary. Cuvets are constructed from specialized optical glass to ensure the best and most consistent results. The positive locking system ensures that the cuvet is in the same position every time it is placed into the measuring cell. Our sample cell is designed to fit a cuvet with a wide neck to make it easier to add both sample and reagents. All instruments are factory calibrated and the electronic and optical design minimizes the need for frequent calibration. Ideal for field applications, these meters are splash proof and the lamp and filter units are protected from dust or dirt by a transparent barrier. Display messages aid the user during routine operation. The auto-off feature will disengage the meter after 10 minutes of non-use in measuring mode or 1 hour while in
calibration mode. HI96734 utilizes an adaptation of the USEPA Method 330.5 and Standard Method 4500-Cl. The reaction between free and total chlorine and DPD reagent causes a pink tint in the sample.


  
Specifications:
Free Chlorine Range 0.00 to 10.00 mg/L
Total Chlorine Range 0.00 to 10.00 mg/L
Resolution 0.01 mg/L from 0.00 to 3.50 mg/L; 0.10 mg/L above 3.50 mg/L
Accuracy ±0.03 mg/L ±3% of reading @ 25°C; Excluding dilution error
Light Source Tungsten lamp
Light Detector Silicon photocell with narrow band interference filter @ 525 nm
Method Adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G.
Typical EMC Deviation ±0.01 mg/L
Environment 0 to 50°C (32 to 122°F); max 95% RH non-condensing
Battery Type 1 x 9 volt
Auto-Shut off After 10′ of non-use in measurement mode; after 1 hour of non-use in calibration mode
Dimensions 192 x 102 x 67 mm (7.6 x 4 x 2.6″)
Weight 290 g (10 oz.).
 
Order Information:
HI96734 is supplied with (2) sample cuvets with caps, 9V battery and instruction manual.
 
HI96734C is supplied with CAL CHECK™ standard cuvets, (2) sample cuvets with caps, 9V battery, tissue for wiping
cuvets, scissors and instruction manual in a hard carrying case.
 

 

Request A Quotation...

Please fill Out Your Details & Any Special Requests