Koehler Instrument K33781
AVAILABLE IN STOCK
Prices Start From Call for price
Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).
Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.
| Electrically heated baths for determining existent gum in aircraft turbine fuels by steam-jet evaporation and in motor and aviation gasolines by air-jet evaporation. Fully insulated, aluminum block design assures safe, efficient high temperature operation. Equipped with air/steam pressure regulator with gauge and a digital flowmeter for adjusting air flow per ASTM specifications. Stainless steel jets deliver air or steam flow to the test wells through removable brass conical adapters. Microprocessor PID control provides quick temperature stabilization without overshoot, and the bath is protected by an overtemperature control circuit that interrupts power should bath temperature exceed a programmed cut-off point. Dual LED displays provide actual and setpoint temperature values in °C/°F format. Model K33900 with Built-in Superheater–Six-unit bath with a built-in thermostatically controlled superheater which delivers dried steam to the bath inlet for steam-jet method testing of aircraft turbine fuels. Has digitalindicating solid state bath temperature control with digital setpoint and display. Model K33950–Six-unit bath without built-in superheater. Model K33780–Three-unit bath without built-in superheater. All controls are housed in the bath cabinet. For steam-jet method testing of aircraft turbine fuels Meets output requirements of three-unit and six-unit evaporation baths Electrically heated for clean, efficient operation and ease of installation Meets applicable ASME, NEC standards; UL listed, CSA approved Electrically heated boiler provides instantaneous and reserve steam capacity for steam-jet evaporation tests. Easy to install and operate; electrical heating eliminates the need for on-site fuel combustion. Requires only a water feed source and electrical hook-up. Ruggedly constructed, with long life industrial grade incoloy heating element. Includes a full range of safety features: automatic water level control and low water cut-off; steam safety valve; high-limit pressure cut-out with manual reset; steam pressure gauge.
Features:
Test Method: |
| Specifications | |
| Conforms to the specifications of: | ASTM D381; IP 131; IP 540; ISO 6246; DIN 51784; FTM 791-3302; NF M 07-004 |
| Testing Capacity: | K33900 and K33950: 6 sample beakers K33780 and K33781: 3 sample beakers |
| Maximum Temperature: | 475°F (246°C) |
| Temperature Control Stability: | ±1°F (±0.5°C) |
| Bath Configuration: | machined aluminum block with multiple cartridge heaters |
| Heater Range: | K33900 and K33950: 0-3000W K33780 and K33781: 0-1500W |
| Superheater: | (Model K33900 only) Superheating chamber and condensate trap constructed of stainless steel Solid state thermoregulator (0-550°F) Heater Range: 0-3000W |
| Steam Generator: | Output: 54.1 lbs steam/hr at 212°F |
| Bhp Rating: | 1.83 |
| kW Rating: | 18 |
| Shipping Weight: | K33900: 313 lbs K33780/K33781: 168 lbs K33950: 271 lbs |
| Dimensions: | K33900: 34x30x28 in K33780/K33781: 34x20x25 in. K33950: 34x30x28 in. |
| Catalog Number | Description | Electrical Requirements |
K33900 |
Existent Gum Evaporation Bath 6-Unit | 220-240V 50/60Hz, Single Phase, 20.4A |
K33950 |
Existent Gum Evaporation Bath 6-Unit | 220-240V 50/60Hz, Single Phase, 13.6A |
K33780 |
Existent Gum Evaporation Bath 3-Unit | 115V 60Hz, Single Phase, 13.0A |
| K33781 * | Existent Gum Evaporation Bath 3-Unit | 220-240V 50/60Hz, Single Phase, 6.8A |
AVAILABLE IN STOCK
AVAILABLE IN STOCK
OUT OF STOCK (BACKORDER AVAILABLE)
AVAILABLE IN STOCK
