Home » Entire Product Range » Metrology » Indicator Gauges » Mitutoyo 543-351 Digital Indicator Signal ID-C

Mitutoyo 543-351 Digital Indicator Signal ID-C

Inch/Metric, 0,5″, 0,00005″, Lug Back

AVAILABLE IN STOCK

Prices Start From Call for price

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Description

This is an externally-powered Digimatic Indicator with a N-ch open drain €“NG, OK, +NG output.

Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
Measures MAX/MIN/RANGE (run-out value).
Saves three different Preset and Tolerance settings.
Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
Analogue bar graph in the display (12 different scales switchable)
GO/±NG tolerance judgment function

Digital/Analog:	Digital
Inch-Metric:	Inch/Metric
Range:	0.5″/12.7 mm
Range:	0,5″ “
Digital step:	0.00005″/0.0001″/0.0005″/0.001 mm/0.01 mm
Max. Permissible Error E MPE (Total Range):	±0.0001″/0.003 mm
Scale:	Electrostatic capacitance type absolute linear encoder
H MPE (Hysteresis):	0.0001″/0.002 mm
R MPE (Repeatability):	0.0001″/0.002 mm
Measuring force MPL:	≤2.5 N
Protection:	IP54
Type:	EN ISO Standard
Measuring force:	≤2,5 N
Display:	LCD, character height 8 mm
Max. response speed:	Unlimited
Measurement frequency (MAX/MIN/RANGE):	Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement)
Alarm:	Low voltage, ABS composition error, overflow error, setting error
Stem ˆ…:	8 mm
Contact point:	Carbide ball, thread: M2.5×0.45
Power supply:	5 – 24 V DC / 100mA (max)
PRESET 3x:	Yes
ON/OFF:	Yes
Analog bar resolution switchable:	Yes
Function lock:	Yes
GO/±NG judgement:	Yes
Signal output: (+NG, OK, -NG):	Yes
Signal input: No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET):	Yes
ABS / INC (INC ZERO):	Yes
GO/±NG judgement via LED:	Yes
Calculation function (with formula):	Yes
Counting direction switchable:	Yes
Inch/Metric switchable:	Yes

Request A Quotation...