• 3 Gpx/sec
• Max speed at full resolution of 1920 x 1080 is 1480 fps
• Max speed  at the minimum resolution of 640×8 is 94,510 fps
• The minimum frame rate at all resolutions is 50 fps.

• CMOS Sensor
• 1920 x 1080 pixels
• 10 µm pixel size
• 19.2 x 10.8 mm; 22.03 mm diagonal
• 10-bit pixel depth
• CAR: 640 x 8

• EMVA 1288 measurements at 532nm
• Standard Mode:
  • Quantum Efficiency: 45.3% mono; 31.5% colour
  • Max. SNR: 37.4 dB
  • AST (p) 33.5 mono; 43.3 color
  • Saturation Capacity (e-): 5501 mono; 5311 colour
  • Temporal Dark Noise: 14.55 e-
  • Dynamic Range: 51.2 dB

• 1 µs minimum exposure
• Auto Exposure

• 16GB internal RAM
• Capability for secured, removable CFast card

• 4.2 seconds at a maximum frame rate of 1480 fps, largest resolution, into 16GB RAM. 12 seconds at 500 fps, largest resolution, into 16GB RAM.

• Conformal coated boards
• Latching door for removable CFast
• Passive cooling
• Segment memory for up to 63 cines in multi-cine mode
• Image-Based Auto-Trigger (IBAT)
• HD-SDI
• Set new CSR default
• Continuous recording
• Memory gate
• Event marking
• Frame timestamp (IRIG)
• Programmable IO
• IRIG In (modulated or unmodulated)
• IRIG Out (unmodulated)
• Burst Mode
• PIV Mode
• Straddle time 1180 ns
• Secondary IP address
• Field-based firmware upgrade capable

• Programmable trigger location (pre/post trigger recording)
• Image-Based Auto-Trigger
• Trigger from software
• Hardware trigger BNC on MiniBOB
• High Voltage (HV) trigger compatible

• 20ns timing accuracy
• Frame synchronization to internal or external clock (FSYNC)
• IRIG In (modulated or unmodulated)
• Ready output (high when the camera is armed and ready to record)
• Strobe output (low during frame exposure time)

• Capture connector-Trigger, IRIG In, IRIG Out, Aux1, Aux2, Programmable IO.
• Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate.
• Aux2 signal can be assigned to Ready or Strobe.

• Gb Ethernet for control and data.
• Ethernet is accessed through an Ethernet cable with a Fischer connector.

• Phantom Camera Control software (PCC)
• SDK available

• HD-SDI is available through the DIN 1.0 / 2.3 connector on the front of the cameras

• 1” C Mount that can be reversed to accept CS lenses. The C321AIR requires a 4/3” format C mount lens for optimal imaging

• Brightness
• Gain
• Gamma
• Saturation
• White Balance
• Pedestal
• Tone curve
• Filters
• Color matrix
• Image flip and rotate
• Crop
• Scale

• National Instruments M- and X-Series DAQ modules with integrated support in PCC

Basic measurements via Phantom Application:

• Distance
• Speed
• Acceleration
• Angles and Angular Speed
• Manual and Automatic point collection for target tracking
• Compatible with 3rd party solutions

• Cine, Cine Compressed, & Cine RAW
• AVI
• h.264 mp4
• Apple ProRes .mov
• Multipage TIFF
• MXF PAL
• MXF NTSC
• Uncompressed QuickTime
• Windows BMP
• OS/2 BMP
• PCX, TGA, TIFF, LEAD, JPEG
• JTIF, RAW, DNG, DPX

16 – 36 VDC, 14 W

• 2.9 x 2.9 x 4.2 inches, 73 x 73 x 106.7 mm (H x W x D) without lens or lens mount.
• Weight: 1.4 lbs, 0.64 kg (without lens)

• Operating Temperature: -55°C – 50°C
• Storage Temperature: -55°C to +71°C
• Shock: 170G, 6msec sawtooth, 3 axes, 2 directions per axis, 10 shocks per direction (60 pulses total) (without lenses)
• Airborne Environmental tests: (pending)
• IAW MIL-STD-810H:
• Temperature: Methods 501.7 / 502.7: 50C; -55C
• Altitude: Method 500.6: 50,000ft Storage / Operation
• Shock: Method 516.8: 20g Operation; 40g Crash
• Vibe: Method 514.8: 20 grams, Category 12
• Humidity: Method 407.6: 95% RH
• Power: MIL-STD-704F, 28VDC
• EMI: MIL-STD-461E, EN 61326-1: 2013

• Phantom SDK
• LabView
• MatLab
• Python

• Power Supply
• Ethernet Cable
• Miro MiniBoB
• DIN 1.0/2.3 cable

• DIN 1.0 / 2.3 cable
• CFAST card