Phantom TE2010 T-Series High-Speed Camera

The Phantom T-Series TE2010 is a compact, easy-to-configure, High-Speed Camera capable of capturing 20,000 fps at 1 Mpx and over 1M fps at reduced resolution and FAST option.  BSI sensor technology ensures premium image performance.

  • 19,210 fps at 1280 x 832
  • Sensitivity: Quantum Efficiency*
    • 59.9% mono
    • 53.6% color
  • 32, 64, 128GB RAM
  • Add FAST option for 1M fps and 190ns exposure

*QExFF at 532nm

Available on back-order

Prices Start From AED308,300

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Available on back-order

The Phantom T-Series TE2010 High-Speed Camera delivers ultra high-speed frame rates with premium connectivity and features at a competitive price. This model is ideal for industrial reliability testing, material development and scientific motion analysis. The custom backside-illuminated (BSI) sensor ensures good image quality in challenging environments where there is limited available light.

The Phantom T-Series TE2010 includes premium features to enable a variety of applications including:

  • EDR (Extreme Dynamic Range) provides flash mitigation for ballistic studies by dynamically adjusting exposure in saturated areas of the image.
  • Programmable I/O to interface with DAQ systems and a variety of measurement sensors, which can be recorded and viewed as metadata in Cine files.
  • Ability for a fully automated workflow when using Image-based auto-trigger (IBAT) combined with multi-Cine partitions and Continuous Recording in PCC.
Key Features
  • Binning Mode – frame rate boost at 640 x 384 and below
  • SDI and micro HDMI video outputs
  • Programmable I/O – Assign and define camera signals
  • 10Gb Ethernet standard
What’s in the box?
  • 280W Power supply with XLR extender
  • Ethernet Cable
  • Mini-SDI video cable
  • Printed Manual and PCC Software CD available upon request.

Standard Mode

Resolution FPS
1280 x 832 19,210
768 x 768 34,060
1024 x 384 51,180
768 x 128 196,360
512 x 32 469,560
512 x 32* *1,080,000

Binned Mode

Resolution FPS
640 x 384 81,810
512 x 384 100,930
640 x 128 234,780
384 x 64 385,710
256 x 64 469,560
256 x 64* *1,080,000
  • The Phantom TE2010 captures up to 19,210 fps at full resolution of 1280 x 832
  • Binned mode combines pixels for higher frame rates with a max resolution of 640 x 384
  • FAST option is available for exposure times down to 190 ns

Throughput/Speed

  • 20 Gpx/second
  • Standard mode max rate:
    • 1280 x 832 at 19,210 fps (full resolution)
    • 512 x 32  at 469,560 fps standard, or 1.08M fps with FAST option
  • Binned mode max rate:
    • 640 x 384 at 81,810 fps (full binned resolution)
    • 256 x 64 at 469,560 fps standard, or 1.08M fps with FAST option
  • Minimum Frame rate is 100 fps

Sensor Specifications

  • CMOS Back Side Illuminated (BSI) Sensor
  • 1280 x 832 pixels
  • 18.5 µm pixel size, 37 µm with binning enabled
  • Sensor size 23.9 mm x 15.4 mm
  • 10-bit depth
  • EMVA 1288 measurements at 532nm
  • Standard Mode:
    • Quantum Efficiency: 59.9% mono; 53.6% color
    • Max. SNR: 38.5 dB
    • AST (p) 32.9 mono; 39.1 color
    • Saturation Capacity (e-): 7014 mono; 7445 color
    • Temporal Dark Noise: 19.0 e-
    • Dynamic Range: 51.0 dB
  • Binned Mode:
      • Quantum Efficiency: 35.5%
      • Max. SNR: 42.4 dB
      • AST (p) 108.6
      • Saturation Capacity (e-): 17256
      • Temporal Dark Noise: 37.7 e-
      • Dynamic Range: 53 dB
Exposure
  • 1 µs minimum exposure standard, 190 ns minimum exposure with FAST option (export controlled)
  • Global electronic shutter
  • Extreme Dynamic Range (EDR)
  • Auto Exposure
  • Exposure Index (E.I.)
  • Shutter Off mode for PIV
Memory
  • 32GB, 64GB, 128GB high-speed internal RAM
  • Up to 63 memory partitions.
Record Times
  • 4.4 seconds at maximum frame rate, 1280 x 832 resolution into 128GB internal memory
Special Features
  • 10Gb Ethernet
  • Binned mode for double the vertical resolution at high frame rates (Output is monochrome)
  • Multi-cine mode and up to 63 memory segments
  • Continuous recording
  • Event marking
  • Frame timestamp
  • IRIG In (modulated and unmodulated)
  • IRIG Out (unmodulated)
  • Sync-to-Trigger
  • Shutter-off mode for PIV
  • 205 ns straddle time in PIV mode
  • Burst mode
  • Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
  • DHCP or Secondary IP address
  • Field-based firmware upgrade capable
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger
  • Trigger from software
  • Hardware trigger BNC
  • High Voltage (HV) trigger compatible
Timing and Synchronization
  • Timing resolution < 20ns
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out (modulated or unmodulated)
  • Ready output (high when the camera is armed and ready to record)
  • Strobe output (low during frame exposure time)
Signalling
  • Dedicated Trigger, Timecode In ports
  • Dedicated Remote port for RS232
  • Dedicated Range Data
  • 3 Programmable I/O ports include adjustable (assign and define) signals including:
    • F-sync
    • strobe
    • event
    • trigger output
    • ready and more
Connectivity
  • Gb Ethernet
  • 10Gb Ethernet (auto-negotiating)
  • WiFi via USB Dongle for control (option to order from factory to permanently disable WiFi)
Camera Control
  • Phantom Camera Control software (PCC)
  • On-Camera Controls standard
  • SDK available
Video Out
  • 2X 3G HD-SDI ports
  • Micro-HDMI
  • Supports up to 1080p60.
Lensing
  • Nikon F-mount standard supports F & G style lenses
  • Canon EOS mount optional
  • PL-mount optional
  • C-mount optional
  • M42-mount optional
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • White Balance
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
    • Distance
    • Speed
    • Acceleration
    • Angles and Angular Speed
    • Manual and Automatic point collection for target tracking
    • Compatible with 3rd party solutions
Supported File Formats
  • Cine RAW & Cine Compressed
  • AVI, h.264 mp4
  • Apple ProRes .mov
  • Multipage TIFF
  • MXF PAL & MXF NTSC
  • Uncompressed QuickTime
  • Windows BMP
  • OS/2 BMP, PCX, TGA
  • TIFF, LEAD, JPEG
  • JTIF, RAW, DNG, DPX
Power
  • 100 – 240 VAC, 280 Watt power supply included
  • 20 – 28 VDC secondary power input on the back panel
Mechanical Specifications
  • 5 x 5 x 6.7 inches, 12.7 x 12.7 x 16.9 cm (H, W, L) without handle or lens. Handle adds 2″(5 cm) to height
  • Weight: 9 lbs, 4.0 kg
Environmental Specifications
  • Operating Temperature: -10 to +50 C
  • Storage Temperature: -20 to + 70 C
  • Regulatory(EMI/EMC/ESD):
    • Emissions:  EN 61326-1, FCC part 15
    • Immunity: EN 61326-1
  • Shock:
    • Operational: 30G, 11mSec sawtooth, 3 axes, 60 pulses total.
  • Vibration:
    • Operational:7.5 Grms, 50Hz-2KHz, 3axes, IAW MIL-STD-202H.
  • Safety: IEC 60950-1
APIs
  • Phantom SDK, C#, C++
  • LabView
  • MatLab
Ships Standard With
  • Power supply 280W w/ XLR cable
  • Fischer Ethernet cable
  • BNC Cable
  • Phantom PCC software
  • Getting Started Guide
Options
  • FAST Option
Popular Accessories
  • Case with custom foam
  • Video monitor

Request A Quotation...

Please fill Out Your Details & Any Special Requests