Home » Entire Product Range » High-Speed Cameras » Phantom High-Speed Cameras » Phantom T3610 T-Series High-Speed Camera

Phantom T3610 T-Series High-Speed Camera

T3610 packs ultrahigh-speed frame rates and performance into a compact platform, 50% lighter than the closest equivalents. Back side illuminated (BSI) sensor technology maximizes sensitivity for sub-microsecond exposure times as often required in high-velocity testing.

38,040 fps at 1280 x 800
Sensitivity: Quantum Efficiency*
- Mono: 80.3%; Binned 74.1%
- Color: 76%
Up to 256GB RAM
FAST option*, 190ns min. exposure

OUT OF STOCK (BACKORDER AVAILABLE)

Prices Start From AED477,100

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

OUT OF STOCK (BACKORDER AVAILABLE)

At its full 1 Mpx resolution of 1280 x 800, the Phantom T3610 captures over 38,000 fps. This 38 Gpx/second throughput is maintained through its full range for a top frame rate of 875,000 fps at both 1280 x 32 (standard mode) and 640 x 64 (binned mode). Binned mode increases the vertical resolution of the camera’s top frame rates by combining the sensor pixels 2×2. Binned mode is included on both mono and colour T3610 cameras, however, the output will switch to mono when used on a colour camera.

The frame rates provided by the Phantom T3610 are sought after for combustion, impact testing, spray dynamics, shock wave analysis and other applications that benefit from sub-microsecond exposure times. The T3610 custom BSI sensor delivers on all fronts, including the ability to shoot in environments with limited supplemental light.

The T3610 includes premium features to enable a variety of applications including:

EDR (Extreme Dynamic Range) provides flash mitigation for ballistic studies by dynamically adjusting exposure in saturated areas of the image.
Programmable I/O to interface with DAQ systems and a variety of measurement sensors, which can be recorded and viewed as metadata in Cine files.
Remote, standalone operation is achieved by using the on-camera controls, video monitor and CineMag.

Key Features

Binning Mode – frame rate boost at 640 x 384 and below
CineMag 5 Compatibility
SDI and HDMI video outputs
Programmable I/O – Assign and define camera signals
10Gb Ethernet

What’s in the box?

280W Power supply with XLR extender
Ethernet Cable
Mini-SDI video cable

Standard Mode

Resolution	FPS
1280 x 800	38,040
1280 x 640	46,250
1280 x 320	94,590
1280 x 192	156,710
1280 x 128	233,330
1280 x 32	772,000

Binned Mode

Resolution	FPS
640 x 384	156,710
640 x 320	187,500
640 x 256	233,330
640 x 192	308,820
640 x 128	456,520
640 x 64	772,000

The Phantom T3610 camera captures up to 38,040 fps at full 1-Mpx resolution and has all of the features of the T-Series family.
Binned mode combines pixels for higher frame rates at 640 x 384 and below.

Throughput/Speed

38 Gpx/second
Standard Mode Max Speeds:
- 1280 x 800 38,040 fps (full resolution)
- 1280 x 32 772,000 fps (875,000 fps with FAST option)
Binned Mode Max Speeds:
- 640 x 384 156,710 fps (full binned resolution)
- 640 x 64 772,000 fps (875,000 fps with FAST option)
Minimum Frame rate is 100 fps

Sensor Specifications

CMOS Back Side Illuminated (BSI) Sensor
1280 x 800 pixels
18.5 µm pixel size, 37 µm with binning enabled
23.7 mm x 14.8 mm; 27.94mm diagonal
12-bit depth
CAR in 256 x 32 increments,

128 x 64 in Binned modes

EMVA 1288 measurements at 532nm
Standard Mode:
- Quantum Efficiency: 80.3% mono; 76.0% colour
- Max. SNR: 39.8 dB
- AST (p) 29.7 mono; 36.0 colour
- Saturation Capacity (e-): 9469 mono; 10344 colour
- Temporal Dark Noise: 23.34 e-
- Dynamic Range: 52.0 dB
Binned Mode:
- Quantum Efficiency: 74.1%
- Max. SNR: 45.5 dB
- AST (p) 77.2
- Saturation Capacity (e-): 35581
- Temporal Dark Noise: 56.6 e-
- Dynamic Range: 55.9 dB

*Binned Mode is Mono Output Only

Exposure

1 µs minimum exposure standard, 190 ns minimum exposure with FAST option (export controlled)
Global electronic shutter
Extreme Dynamic Range (EDR)
Auto Exposure
Exposure Index (E.I.) for controlling apparent ISO
Shutter Off mode for PIV

Memory

64GB, 128GB, 256GB high-speed internal RAM.
Up to 63 memory partitions.
CineMag V for non-volatile storage (not available at launch)

Record Times

4.5 seconds at maximum frame rate, 12 bits, 1200 x 800 resolution into 256GB internal memory

Special Features

10Gb Ethernet
Binned mode for double the vertical resolution at high frame rates (Output is monochrome)
Multi-cine mode and up to 63 memory segments
Continuous recording
Event marking
Frame timestamp
IRIG In (modulated and unmodulated)
IRIG Out (unmodulated)
Sync-to-Trigger
Shutter off mode for PIV exposure
230 ns straddle time in PIV mode
Burst mode
Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
DHCP or Secondary IP address
Field-based firmware upgrade capable

Triggering

Programmable trigger location (pre/post trigger recording)
Image-Based Auto-Trigger standard
Trigger from software
Hardware trigger BNC
High Voltage (HV) trigger compatible

Timing and Synchronization

Frame synchronization to internal or external clock (FSYNC)
IRIG in/out
Ready output (high when the camera is armed and ready to record)
Strobe output (low during frame exposure time)

Signalling

Dedicated Trigger, Timecode In ports
Dedicated Remote port for RS232
Dedicated Range Data
3 Programmable I/O ports include adjustable (assign and define) signals including:
- F-sync
- strobe
- event
- trigger output
- ready and more

Connectivity

Gb Ethernet and 10Gb Ethernet for control and data downloads
WiFi via USB Dongle for control (option to order from factory to permanently disable WiFi)

Camera Control

Phantom Camera Control (PCC)
On-Camera Controls (OCC)
SDK available

Video Out

2X 3G HD-SDI ports
Micro-HDMI
Supports up to 1080p60.

Lensing

Nikon F-mount standard supports F & G style lenses
Canon EOS mount optional
PL-mount optional
C-mount optional
M42-mount optional
(lens not included)

Video Processing

Brightness
Gain
Gamma
Saturation
White Balance
Pedestal
Tone curve
Filters
Color matrix
Image flip and rotate
Crop
Scale

Data Acquisition

National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions

Supported File Formats

Cine RAW & Cine Compressed
AVI, h.264 mp4
Apple ProRes .mov
Multipage TIFF
MXF PAL & MXF NTSC
Uncompressed QuickTime
Windows BMP
OS/2 BMP, PCX, TGA
TIFF, LEAD, JPEG
JTIF, RAW, DNG, DPX

Power

100 – 240 VAC, 280 Watt power supply included
20 – 28 VDC secondary power input on the back panel

Mechanical Specifications

5 x 5 x 8.25 inches, 12.7 x 12.7 x 21 cm (H, W, L) without handle or lens.
Handle adds 2″(5 cm) to height
Weight: 9.4 lbs, 4.3 kg

Environmental Specifications

Operating Temperature: -10 to +50 C
Storage Temperature: -20 to + 70 C
Regulatory(EMI/EMC/ESD):
- Emissions: EN 61326-1, FCC part 15
- Immunity: EN 61326-1
Shock:
- Operational: 30G, 11mSec sawtooth, 3 axes, 60 pulses total.
Vibration:
- Operational:7.5 Grms, 50Hz-2KHz, 3axes, IAW MIL-STD-202H.
Safety: IEC 60950-1

APIs

Phantom SDK, C#, C++
LabView
MatLab

Ships Standard With

Power supply 280W w/ XLR cable
Fischer Ethernet cable
BNC Cable
Phantom PCC software
Getting Started Guide

Options

CineMag interface
FAST Option
CineMag 5

Popular Accessories

Case with custom foam
CineMag 5
CineStation IV
Video monitor