Standard Mode

Standard Binning Mode

High-Speed Mode

High-Speed Binning Mode

Common resolutions and frame rates, other resolutions available.

The Phantom v2640 Onyx is a special version of the v2640 that includes features important to media production such as a black housing, standard PL mount, and optical low pass filter (OLPF). The v2640 is the fastest 4Mpx camera on the market, achieving 6,600 fps at a full resolution of 2048×1952. It has excellent image quality with a dynamic range of 64.1dB and noise of only 7.2e- for clear, detailed images. The Onyx is available for rent from Vision Research and select partners around the world.

Throughput/Speed

• 26 Gpx/second
• Max speed at full resolution of 2048 x 1952 is 6,600 fps.
• The minimum frame rate is 100 fps

Sensor Specifications

• CMOS Sensor
• 2048 x 1952 pixels
• 13.5 µm pixel size
• 27.6 mm x 26.3 mm;
• Super-35mm wide; 38.2mm diagonal
• 12-bit depth
• TE and heat pipe cooled
• CAR in 128 x 8 increments,
• Standard Mode:
  • ISO Color 3,200D,
  • E.I. range 3,200-16,000D;
• High-Speed Mode:
  • ISO Color 3,200D,
  • E.I. range 3,200-16,000D

Exposure

• 1 µs minimum exposure standard,
  • 499ns min. exp. in Standard
  • 142ns min. exp. in HS with FAST option
• Global electronic shutter
• Auto Exposure
• Shutter Off mode for PIV

Memory

• 144 GB standard RAM
• 288 GB optional RAM.
• CineMag IV and V for non-volatile storage (up to 8TB)

Record Times

• 3.9 seconds at max fps, 12 bits, 2048 x 1952 resolution and 144GB RAM.
• Longer times are available when recording directly to a CineMag at lower frame rates

Special Features

• 10Gb Ethernet standard
• Segment memory up to 63 times
• Continuous recording
• Memory gate
• Event marking
• Frame timestamp
• IRIG In (modulated and unmodulated)
• IRIG Out (unmodulated)
• Sync-to-Trigger
• GPS input for timing and latitude & longitude
• Shutter off mode for PIV exposure
• 490 ns straddle time – Standard Modes
• 696 ns straddle time – HS Modes
• Burst mode
• Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
• Secondary IP address

Triggering

• Programmable trigger location (pre/post trigger recording)
• Image-Based Auto-Trigger
• Trigger from software, on-camera controls, or hardware trigger BNC
• High Voltage (HV) trigger compatible

Timing and Synchronization

• Frame synchronization to internal or external clock (FSYNC)
• IRIG in/out
• Ready output (signals ready to record)
• Strobe output (low during frame exposure time)

Signalling

• Programmable I/O ports include:
  • adjustable (assign and define) signals
  • F-sync
  • Strobe
  • Event
  • trigger output
  • ready and more
• Dedicated FSYNC, Trigger, Timecode In, Timecode Out, and Strobe BNCs on camera body
• Range Data input on the camera body
• Remote port
• GPS input for timing, longitude & latitude
• Capture connector, Available signals:
  • Event, Trigger, Strobe, Ready
  • IRIG In & IRIG Out
  • Video Out
  • Serial Port
  • Power Out
  • A-Sync (IBAT Trigger)
  • Pretrigger/Memgate)

Connectivity

Gb Ethernet 10Gb Ethernet for both control and data

Camera Control

• Phantom Camera Control software (PCC)
• On-Camera Controls standard
• SDK available

Video Out

• Two HD-SDI BNC ports on the camera.
• Component viewfinder port.
• Supports up to 1080p30.

Lensing

• PL-mount standard
• Canon EOS mount optional
• Nikon-mount optional,
  • Supports F & G style lenses.
  • (lens not included)

Video Processing

• Brightness
• Gain
• Gamma
• Saturation
• Hue
• White Balance
• Colour interpolation algorithm
• Flare
• Pedestal
• Tone curve
• Filters
• Color matrix
• Image flip and rotate in PCC
• Crop
• Scale

Data Acquisition

• National Instruments M- and X-Series
• DAQ modules with integrated support in PCC

Motion Analysis

• Basic measurements via Phantom Application:
• Distance
• Speed
• Acceleration
• Angles and Angular Speed
• Manual and Automatic point collection for target tracking
• Compatible with 3rd party solutions

Supported File Formats

• Cine, Cine Compressed, Cine RAW
• AVI, h.264 mp4
• Apple ProRes .mov
• Multipage TIFF, MXF PAL, MXF NTSC
• Uncompressed QuickTime
• Windows BMP
• OS/2 BMP
• PCX, TGA, TIFF
• LEAD, JPEG, JTIF
• RAW, DNG, DPX

Power

• 100 – 240 VAC, 280 Watt power supply included
• 20 – 28 VDC backup battery input on the camera back panel

Mechanical Specifications

• Without Handle:
  • 11 x 7.5 x 7.43 inches (L, W, H)
  • 28 x 19 x 18.88 cm (L, W, H)
• Handle adds 2.24″(5.7 cm) to height.
• Weight: 17 lbs, 8 oz, 8.1 kg

Environmental Specifications

• Operating Temperature:
  • o-10 to +50 C
  • 10G Operating Temp: +5 – +50 C
• Storage Temperature: -20 to + 70 C
• Humidity: 95% non-condensing
• Altitude:
  • Operational: 0 to 10 k feet above sea level
  • Non-Operational: -500 to 50 k feet above sea level
• Regulatory(EMI/EMC/ESD):
  • Emissions:EN 61326-1, FCC part 15
  • Immunity: EN 61326-1
• Random Vibration:
  • Operational:7.5 Grms, 3axes, IAW MIL-STD-202G.
• Shock:
  • Operational: 5.5G, 11mSec sawtooth, 3 axes,60 pulses total.
  • Non-Operational: 30G, 11mSec sawtooth, 3 axes,60 pulses total.
• Safety: IEC 60950

APIs

• Phantom SDK
• LabView
• MatLab

Ships Standard With

• Power supply
• Fischer Ethernet cable
• Phantom PCC software
• Printed Manual
• Ships in Pelican Case

Options

• Canon EOS lens mount
• F-mount

Popular Accessories

• CineMag V
• CineStation IV
• Video monitor for use with on-camera controls