Common resolutions and frame rates, other resolutions available.

• Phantom VEO cameras are compact, rugged and full of premium features. The 440 model captures over 1,000 frames per second at a four-megapixel resolution.
• Programmable I/O, SDI video, Canon EOS lens support and optional CFast 2.0 recording media are just a few of the features you will appreciate.
• Available in both L and S styles.

Throughput/Speed

• 4 Gpx/second
• Max speed at full resolution of 2560 x 1600 is 1,100 fps
• At 1920 x 1080 the VEO 440 captures over 2,100 fps
• Max speed at a reduced resolution of 128 x 4 is 290,000 fps
• Min frame rate of 24 fps

Sensor Specifications

• CMOS sensor
• 2560 x 1600 pixels
• 10 µm pixel size
• 12-bit depth
• TE cooled
• CAR in 128 x 4 increments

• EMVA 1288 measurements at 532nm
  • Quantum Efficiency: 60.2% mono; 43.6% colour
  • Max. SNR: 41.6 dB
  • AST (p) 40.4 mono; 54.1 colour
  • Saturation Capacity (e-): 14512 mono; 14335 colour
  • Temporal Dark Noise: 23.8 e-
  • Dynamic Range: 55.5 dB

Exposure

• 1 µs minimum exposure
• Global electronic shutter
• Exposure Index (E.I.) for controlling apparent ISO
• Extreme Dynamic Range (EDR)
• Auto Exposure
• Shutter Off mode for PIV

Memory

• 18 GB, 36 GB, 72 GB high-speed internal RAM
• On-board removable CFast 2.0 cards (S-models) up to 512GB

Record Times

• 11.4 seconds at maximum frame rate, largest resolution and maximum internal memory

Special Features

• 10Gb Ethernet (optional)
• Segment memory for up to 63 cines in multi-cine mode
• Continuous recording
• Programmable I/O
• HD-SDI and HDMI video
• Event marking
• Frame timestamp (IRIG SMPTE or MISP)
• IRIG in/out (modulated and unmodulated)
• Shutter off mode for PIV exposure
• 1.71 μs straddle time
• Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
• Image-Based Auto-Trigger (IBAT)
• One 12 VDC, 6W auxiliary power port
• Secondary IP address
• Field-based firmware upgrades

Triggering

• Programmable trigger location (pre/post trigger recording)
• Image-Based Auto-Trigger
• Trigger from software
• Trigger from on-camera controls (S-model)
• Hardware trigger BNC
• High Voltage (HV) trigger compatible

Timing and Synchronization

• Frame synchronization to internal or external clock (FSYNC)
• IRIG in/out (modulated or unmodulated)

Signalling

• Dedicated Trigger and Timecode In BNCs on camera body
• Range Data input on S-model camera body (Fischer)
• Programmable I/O ports include adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more

Connectivity

• Control and download connections
  • Gb Ethernet (standard);
  • 10Gb Ethernet (optional)
• Fischer port on S-models; RJ45 port on L-models

Camera Control

• On-Camera Controls (OCC) on S-model camera
• Phantom Camera Control (PCC)
• SDK available

Video Out

• 3G HD-SDI and HDMI on all VEO models.
• Additional 3G HD-SDI BNC port on the back of the S-model.
• Supports up to 1080p60.

Lensing

• Nikon F-mount standard supports F & G style lenses
• Canon EOS mount optional
• PL-mount optional
• C-mount optional
• (lens not included)

Video Processing

• Brightness
• Gain
• Gamma
• Saturation
• White Balance
• Pedestal
• Tone curve
• Filters
• Color matrix
• Image flip and rotate
• Crop
• Scale

Data Acquisition

• National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

• Basic measurements via Phantom Application:
• Distance
• Speed
• Acceleration
• Angles and Angular Speed
• Manual and Automatic point collection for target tracking
• Compatible with 3rd party solutions

Supported File Formats

• Cine RAW, Cine Compressed, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

Power

• 100 – 240 VAC, 16-32 VDC via primary power input.
• 80 Watt 24V power supply included
• Secondary power input, down to 12V via capture port on S-model cameras

Mechanical Specifications

• Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm
• Weight: 5.6 lbs (2.5 kg)

Environmental Specifications

• Operating Temperature: -10°C – 50°C
• Shock: MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total)
• Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)

APIs

• Phantom SDK
• LabView
• MatLab

Ships Standard With

• Power supply
• Ethernet cable
• SDI DIN Cable
• Phantom PCC software
• Getting Started Guide

Options

• Canon EOS lens mount
• PL-mount
• C-mount

Popular Accessories

• Handle
• Cheese Plate
• Battery mounts (S-models)
• Cameo VEObob for added power outputs and remote port (S-model)
• Case with custom foam