Rapidia – Conflux 1 Metal 3D Complete System

Rapidia Conflux1 System (Complete)

Scalable Industrial Additive Manufacturing …Just add MORE printers!

Pair multiple printers with each furnace while maintaining full productivity.

  • 62 kWh AV. FOR 316L RAPID CYCLE
  • 400-450L AV. GAS USAGE
  • 92 kWh AV. FOR 316L EXTENDED CYCLE
  • 750-850L AV. GAS USAGE

Available on back-order

Prices Start From Call for price

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Rapidia Conflux1 Complete System

High-efficiency sintering furnace has low sintering gas and electricity use. Sinters with standard argon gas, while achieving excellent metallurgy exceeding MIM standards.

Make metal parts wherever you need them.

Scalable Industrial Additive Manufacturing …Just add printers!

Pair multiple printers with each furnace while maintaining full productivity.

  • 62 kWh AV. FOR 316L RAPID CYCLE
  • 400-450L AV. GAS USAGE
  • 92 kWh AV. FOR 316L EXTENDED CYCLE
  • 750-850L AV. GAS USAGE

The Rapidia Conflux1 is an easy-to-use, fast, and affordable end-to-end metal additive manufacturing solution.

Powered by Metal Paste Deposition

Our powder-free metal 3D printing process can scale from lab-based rapid prototyping into an affordable small-scale production solution.

Conflux 1 makes functional metal parts way faster.

Most parts are finished in less than half the time it takes to make functional parts with metal filament.

Get functional parts in under 24hrs.

Conflux 1 makes metal 3D printing safer.

Metal that is safely bound in a paste feedstock. No chemical solvents or loose powder, no VOCs.

Make metal parts wherever you need them.

Conflux 1 makes printing metal more affordable.

Rapidia’s system has among the lowest operating costs of any metal additive manufacturing system.

Keep low-volume part production lean and agile.

Printer to Sinter

A complete metal additive manufacturing solution

Ready to go without the need for a dedicated operator and no additional equipment for powder handling, stress relieving, support removal or furnace chilling.

Dual Extruder

Independent Dual Extruders allow Conflux 1 to print two materials in the same print. Using our Evaporative Support material in one extruder allows printing of any shape, any overhang.

Sealed Feedstock

Quick and easy materials changes. Feedstock cartridges can be stored at any fill level. Stainless steel feedstock containers are reused through our cartridge exchange program.

Easy Calibration

Rapidia Print is our print management software. It provides built-in extrusion calibration, extruder alignment, and print monitoring.

Rapidia Conflux 1 is an Open Platform

Prepare prints with your preferred slicer or use Rapidia Cura with added support generation tools. Slicing profiles are tuned for optimal results on Conflux 1, but all settings remain unlocked to give users full control.

Users may also create custom Conflux 1 Furnace cycles for vacuum heat treating, vacuum brazing, or specific sintering needs.

PRINT TECHNOLOGY Metal Paste Deposition, Independent Dual Extruder
FEEDSTOCK 1L/1000cc feedstock cartridges
Cartridge exchange program
DEPOSITION SPEED ~50 g / hour (316L, 17-4 PH)
MAX. BUILD ENVELOPE 200 mm x 240 mm x 150 mm,
7.87” x 9.45” x 5.9”

 

ATMOSPHERE Partial-pressure vacuum sintering
GAS TYPES Argon (standard sintering),
Argon with 5% Hydrogen (compatible)
MAX. TEMPERATURE 1400 °C
2550 °F
HOT ZONE DIMENSIONS 245 mm ID by 305 mm,
9.64” ID by 12” long

Request A Quotation...

Please fill Out Your Details & Any Special Requests