Techne TE-10D High-Stability Digital Immersion Circulator 230V

Techne FTE10DDC

Prices Start From Call for price

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Link Gulf FTE10DDC 
TE-10D High-Stability Digital Immersion Circulator 230V
Techne FTE10DDC / Cole-Parmer EW-01262-07 / Cole-Parmer IC-300-10DDC / Fisher 50-196-0465 / VWR 14228-920 / Thomas 9833H10 

Techne invented the “Clip On” thermoregulator in 1948, and now offer four units. Thermoregulators are designed to be used with the Techne® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits.

  • Temperature range of -40°C to 120°C
  • Please note for sub-ambient cooling a Dip Cooler or Flow Cooler is required. Click here.
  • Applications <0°C and >100°C require Techne bath oil. Click here.
  • Excellent temperature stability: ±0.01°C at 40°C
  • 4 digit setting with a bright LED digital temperature display
  • Suitable for most routine laboratory applications
  • User adjustable over-temperature cut-out
  • Low liquid level cut-out as standard

Sub-ambient cooling
This thermoregulator can be used for sub-ambient cooling, right down to -40°C, although a low-temperature liquid is required below 0°C. Sub-ambient cooling can be achieved using the cooling coil accessory (part number FCC01) connected to an external chilling system, for example a cold tap. Alternatively a Techne dip-cooler or flow cooler could be used as a method of chilling.

External circulation
This thermoregulator can be used in several ways. (1) Stand-alone waterbath temperature controller with precision accuracy and stirring action. (2) Pump for recirculating chilled liquid produced in an external chiller allowing sub-ambient water bath temperature. (3) Pump for providing temperature control to an external system or device. (4) A combination of using externally chilled liquid and providing temperature control to an external system.

Specifications

Specifications to DIN 12876 TE-10D
Temperature range -40°C to +120°C
Temperature selection Digital
Temperature stability using water @ 40°C ±0.01°C
Method of control PID
Temperature sensor PRT
Adjustable over-temperature cut-out Yes
Low liquid level cut-out Yes
Pump capacity litres minute 10
Pump capacity (mbar) 145
Nominal heater power at 120V (W) 1000
Nominal heater power at 240V (W) 1000
Extension below base (mm) 145
Dimensions L x W x H (mm) 237 x 124 x 260
Shipping weight 3.9kg

Order Information

Catalog Number Description Voltage
FTE10DDC * TE-10D digital thermoregulator supplied with clamp 230V

FTE10DPC
TE-10D digital thermoregulator supplied with clamp 120V





Request A Quotation...

Please fill Out Your Details & Any Special Requests