Home » Entire Product Range » Stirring Plates » Torrey Pines Scientific STIRRER 8″ X 8″ CERAMIC TOP

Torrey Pines Scientific STIRRER 8″ X 8″ CERAMIC TOP

Analogue Stirrer Ceramic Top

Torrey Pines ST10 / Link Gulf H3505-ST10

Each Torrey Pines Scientific hot plate is made with a cast aluminium chassis that is painted with chemically resistant epoxy paint. The chassis is designed to keep spills out of the case. Heating and stirring controls are solid state with individual indicator lights that illuminate when either is activated. The controls are well-forward to the heater surface to prevent accidental burns. Additionally, the solid ceramic heater plate is framed in cast aluminium and is designed to keep heat from the edge of the heater plate. Stir on a rugged, quick-heating, flat, white solid ceramic surface or milled-flat cast aluminium surface

Features:

• Stir from 100 to 1500rpm
• Plate size on the HS10, HP10 and ST10 is: 8″ (20.32cm) x 8″ (20.32cm)
• Plate size on the HS1, HP1 and ST1 is 6″(15.24cm) x 6″ (15.24cm)
• Plate size on HS11, HP11 and ST11 is 12″(30.48cm) x 12″(30.48cm)
• Solid ceramic heater surface for excellent chemical resistance
• Milled-flat cast aluminum tops for even heating in 6″ x 6″ and 12″ x 12″ models
• Heater plate mounted in a cast aluminium frame that remains cool for safety
• Efficient 600-watt heaters on the HS10 and HP10
• Efficient 400-watt heaters on the HS1 and HP1
• Powerful 1400 watt heaters on ceramic-topped HS11 and HP11 and 1200 watt heaters on HS11A and HP11A
• Fused for safety
• Rugged cast aluminum chassis
• 12-month warranty
• UL, CSA, and CE certified

REQUEST A QUOTE

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Analogue Stirrer Ceramic Top

Torrey Pines ST10 / Link Gulf H3505-ST10

Features:

The stirrer features a solid-state control capable of stirring an aqueous solution from 100 to 1500 rpm. The control has an OFF position fully counter-clockwise and is continuous over 270 degrees of rotation from minimum to maximum speed when turned on. The magnet is a circular disc with twenty-pound pull strength and is capable of stirring more than two litres of an aqueous solution.

The heater control has OFF, LO, and HIGH positions for quick setting, and a smooth infinite control of about 270 degrees between LO and HIGH settings. The control will regulate a set point to ±2.5°C.

Control knobs are specially selected to provide easy use and a positive, tactile feel. All units are fused and have a 3-foot-long detachable AC line cord with a male plug that matches the local standard. The warranty is 12 months. .

Stirrer:
Speed range unloaded	100 to 1500 rpm
Maximum load, aqueous	HS1, ST1, HS10, ST10: over 2 liters HS11 and ST11: over 10 liters
Magnet strength	20 pounds
Weight capacity on heater surface	Over 50 pounds (22.5 kilos)

Electrical:
Operating voltages available	100VAC/50Hz, 115VAC/60HZ, 220VAC/60HZ, and 230VAC/50Hz
Power consumption	HS10 and HP10: 650 watts HS1 and HP1: 450 watts ST10 and ST1: 100 watts HS11 & HP11: 1450 watts HS11A & HP11A: 1250 watts ST11: 100 watts
Current Draw	100/115VAC Models: HP1 & HS1: 3.75 amps HP10 & HS10: 6.5 amps HP11 & HS11: 12.0 amps HP11A & HS11A: 10.4 amps220/230VAC Models: HP1 & HS1: 1.9 amps HP10 & HS10: 3.25 amps HP11 & HS11: 6.0 amps HP11A & HS11A: 5.2 amps

:
Unit size	HS10, HP10 and ST10: 12″(33cm) deep by 9″(22.9cm) wide by 3.5″(8.9cm) tall HS1, HP1 and ST1: 10″(25.4cm) deep by 7″(17.78cm) wide by 4.5″(11.43cm) tall HS11, HP11 and ST11: 17″ x 12.5″ x 5.5″
Unit Weight, unpacked	HS10 and ST10, 10 pounds(4.5kg). HP10, 8 pounds(3.6kg) HS1 and ST1, 7 pounds(3.17kg). HP1, 5 pounds(2.26kg) HS11: 20 lbs HS11A: 22 lbs HP11: 16 lbs HP11A: 18 lbs ST11: 13 lbs