Torrey Pines Scientific Echotherm HP30A Digital Hot Plate 8″ Aluminum 230V

Torrey Pines Scientific HP30A-2

Prices Start From Call for price

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Link Gulf HP30A-2
Echotherm HP30A Digital Hot Plate 8″ Aluminum 230V
Torrey Pines Scientific HP30A-2
 

The EchoTherm HP30 and HS30 are designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100 ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit accessory.

The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.

HP in model number = hot plate
HS in model number = stirring hot plate

Features

  • Extremely easy use by anyone in your lab
  • Platinum RTD temperature measurement for precision and accuracy
  • Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Milled flat cast aluminum top available
  • Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
  • PID temperature control for exact, tight sample control of plate or solution
  • Temperature ramping for exact heating and cooling rates
  • Timer goes up to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
  • Electronic calibration stored in chip. No batteries to replace
  • Strong motor and magnet for stirring most samples
  • Stir up to 2 liters of aqueous solution from 100-1500 rpm (HS30 and HS30A)
  • Full-featured digital display for checking all parameters instantly
  • High and neutral lines fused for safety
  • UL, CSA and CE certified

 

Specifications
Hot Plate
Dimensions 8” (20.3 cm) x 8” (20.3 cm)
Maximum temperature of the plate surface ceramic top: 450°C
cast aluminum top: 450°C
Temperature control type PID
Temperature accuracy 1%
Temperature regulation, solution or plate ±1°C
Heater power in watts 600 W
Temperature Measurement
Platinum RTD 100 ohm, in plate and in probe
Range ceramic top: 0-450°C
aluminum top: 0-450°C
Readability 1°C
Stirrer
Speed range unloaded 100–1500 rpm
Capacity 2 liters water
Readability 10 rpm
Settability nearest 10 rpm
Electrical
Available in 100, 115 and 230 VAC, 50/60 Hz
Ceramic top 100 and 115 VAC, 8 amp; 230 VAC, 4 amp
Aluminum top 100 and 115 VAC, 8 amp; 230 VAC, 4 amp
Fusing Both high and neutral lines fused
Line cord Detachable, 6 foot (1.8 meter), three-wire, grounded
General
Ceramic and aluminum tops
Dimensions, packed
12.25X18.25X9.5in
(31.12X46.36X24.13cm)
Weight, packed 15 lbs
(6.8 kg)

 

Catalog Number Description Voltage

HP30
Premium Digital Hot Plate 8″ Ceramic 115V

HP30-2
Premium Digital Hot Plate 8″ Ceramic 230V

HP30A
Premium Digital Hot Plate 8″ Aluminum Top 115V
HP30A-2 * Premium Digital Hot Plate 8″ Aluminum Top 230V

HS30
Premium Digital Stirring Hot Plate 8″ Ceramic 115V

HS30-2
Premium Digital Stirring Hot Plate 8″ Ceramic 230V

HS30A
Premium Digital Stirring Hot Plate 8″ Aluminum Top 115V

HS30A-2
Premium Digital Stirring Hot Plate 8″ Aluminum Top 230V

 






Request A Quotation...

Please fill Out Your Details & Any Special Requests