Torrey Pines Scientific Echotherm HP50 Digital Hot Plate 6″ Ceramic 230V

Torrey Pines Scientific HP50-2

Prices Start From Call for price

Prices shown are for the United Arab Emirates only and are excluding VAT @ 5% Local Rate (Unless Otherwise Stated).

Other countries may incur additional import duties – Please Contact Us for further details and pricing for your location.

Link Gulf HP50-2 
Echotherm HP50 Digital Hot Plate 6″ Ceramic 230V
Torrey Pines Scientific HP50-2
 

The EchoTherm HP50 and HS50 are designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100-ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit offered as an accessory.

The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.

HP in model number = hot plate
HS in model number = stirring hot plate

Features

  • Extremely easy use by anyone in your lab
  • Two memory buttons for storing your favorite settings for heater and stirrer for instant, one-button recall and use
  • Platinum RTD temperature measurement for precision and accuracy
  • Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Milled flat cast aluminum top also available
  • Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
  • PID temperature control for exact, tight sample control of plate or solution
  • Timer goes up to 99 hours, 59 minutes and 59 seconds with settable Auto-Off for exactly timed sample preparation
  • Electronic calibration stored in chip. No batteries to replace
  • 6” (15.24 cm) ceramic glass or aluminum tops
  • Strong motor and magnet for stirring most samples
  • Stir 2 liters of aqueous solutions
  • Full featured digital display for checking all parameters instantly
  • Fused for safety
  • ETL, CSA and CE certified
  • RS232 interface for control or for data collection on a computer

 

Specifications
Hot Plate
Dimensions 6” (15.24 cm) x 6” (15.24 cm)
Maximum temperature of the plate surface ceramic top: 450°C; cast aluminum top: 450°C
Temperature control type PID
Temperature accuracy 1%
Temperature regulation, solution or plate ±1°C
Heater power in watts ceramic top: 400 watts; aluminum top: 400 watts
Temperature Measurement
Platinum RTD 100 ohm, in plate and in probe
Range ceramic top: 0–450°C; aluminum top: 0–450°C
Readability 1°C
Stirrer:
Speed range unloaded 100–1500 rpm
Capacity 2 liters of water
Readability 10 rpm
Settability nearest 10 rpm
Electrical
Available in 100, 115 and 230 VAC, 50/60 Hz
Ceramic top 100 and 115 VAC, 4 amp; 230 VAC, 2 amp
Aluminum top 100 and 115 VAC, 4 amp; 230 VAC, 2 amp
Fused Yes
Line cord Detachable, 6 foot (1.8 meter), three-wire, grounded
General
Dimensions, unpacked
Ceramic top 7.0” (17.8 cm) wide, 10.0” (25.4 cm) deep, 4.5” (11.43 cm) high
Aluminum top 7.0” (17.8 cm) wide, 10.0” (25.4 cm) deep, 4.5” (11.43 cm) high
Dimensions, packed
Ceramic and aluminum tops 15” (38.1 cm) by 9” (22.86 cm) by 9” (22.86 cm)
Weight, unpacked
Ceramic and aluminum tops 7 lbs (3.17 kg)
Weight, packed
Ceramic and aluminum tops 9 lbs (4.07 kg)

 

Catalog Number Description Voltage

HP50
Digital Hot Plate 6″ Ceramic 115V
HP50-2 * Digital Hot Plate 6″ Ceramic 230V

HP50A
Digital Hot Plate 6″ Aluminum Top 115V

HP50A-2
Digital Hot Plate 6″ Aluminum Top 230V

HS50
Digital Stirring Hot Plate 6″ Ceramic 115V

HS50-2
Digital Stirring Hot Plate 6″ Ceramic 230V

HS50A
Digital Stirring Hot Plate 6″ Aluminum Top 115V

HS50A-2
Digital Stirring Hot Plate 6″ Aluminum Top 230V

 






Request A Quotation...

Please fill Out Your Details & Any Special Requests