The Phantom T2410 Standard Mode

The Phantom T2410 Binned Mode

• The Phantom T2410 high-speed camera captures over 24,000 fps 1-Mpx resolution and includes all of the features of the T-Series family.
• Binned mode combines pixels for higher frame rates at 640 x 384 and below.
• The FAST option is available for exposure times down to 190 ns

Throughput/Speed

• 24 Gpx/second
• Standard Mode Max Speeds:
  • 1280 x 800 24,270 fps (full resolution)
  • 1280 x 32 558,330 fps
• Binned Mode Max Speeds:
  • 640 x 384 100,000 fps (full binned resolution)
  • 640 x 64 558,330 fps
• Minimum Frame rate is 100 fps

Sensor Specifications

• CMOS Back Side Illuminated (BSI) Sensor
• 1280 x 800 pixels
• 18.5 µm pixel size, 37 µm with binning enabled
• 23.7 mm x 14.8 mm; 27.94mm diagonal
• 12-bit depth
• CAR in 256 x 32 increments,

128 x 64 in Binned modes

• EMVA 1288 measurements at 532nm
• Standard Mode:
  • Quantum Efficiency: 80.3% mono; 76.0% colour
  • Max. SNR: 39.8 dB
  • AST (p) 29.7 mono; 36.0 colour
  • Saturation Capacity (e-): 9469 mono; 10344 colour
  • Temporal Dark Noise: 23.34 e-
  • Dynamic Range: 52.0 dB
• Binned Mode:
  • Quantum Efficiency: 74.1%
  • Max. SNR: 45.5 dB
  • AST (p) 77.2
  • Saturation Capacity (e-): 35581
  • Temporal Dark Noise: 56.6 e-
  • Dynamic Range: 55.9 dB

*Binned Mode is Mono Output Only

Exposure

• 1 µs minimum exposure standard, 190 ns minimum exposure with FAST option (export controlled)
• Global electronic shutter
• Extreme Dynamic Range (EDR)
• Auto Exposure
• Exposure Index (E.I.) for controlling apparent ISO
• Shutter Off mode for PIV

Memory

• 64GB, 128GB, 256GB high-speed internal RAM.
• Up to 63 memory partitions.
• CineMag V for non-volatile storage (not available at launch)

Record Times

• 4.5 seconds at maximum frame rate, 12 bits, 1200 x 800 resolution into 256GB internal memory

Special Features

• 10Gb Ethernet
• Binned mode for double the vertical resolution at high frame rates (Output is monochrome)
• Multi-cine mode and up to 63 memory segments
• Continuous recording
• Event marking
• Frame timestamp
• IRIG In (modulated and unmodulated)
• IRIG Out (unmodulated)
• Sync-to-Trigger
• Shutter off mode for PIV exposure
• 230 ns straddle time in PIV mode
• Burst mode
• Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
• DHCP or Secondary IP address
• Field-based firmware upgrade capable

Triggering

• Programmable trigger location (pre/post trigger recording)
• Image-Based Auto-Trigger standard
• Trigger from software
• Hardware trigger BNC
• High Voltage (HV) trigger compatible

Timing and Synchronization

• Frame synchronization to internal or external clock (FSYNC)
• IRIG in/out
• Ready output (high when the camera is armed and ready to record)
• Strobe output (low during frame exposure time)

Signalling

• Dedicated Trigger, Timecode In ports
• Dedicated Remote port for RS232
• Dedicated Range Data
• 3 Programmable I/O ports include adjustable (assign and define) signals including:
  • F-sync
  • strobe
  • event
  • trigger output
  • ready and more

Connectivity

• Gb Ethernet and 10Gb Ethernet for control and data downloads
• WiFi via USB Dongle for control (option to order from factory to permanently disable WiFi)

Camera Control

• Phantom Camera Control (PCC)
• On-Camera Controls (OCC)
• SDK available

Video Out

• 2X 3G HD-SDI ports
• Micro-HDMI
• Supports up to 1080p60.

Lensing

• Nikon F-mount standard supports F & G style lenses
• Canon EOS mount optional
• PL-mount optional
• C-mount optional
• M42-mount optional
• (lens not included)

Video Processing

• Brightness
• Gain
• Gamma
• Saturation
• White Balance
• Pedestal
• Tone curve
• Filters
• Color matrix
• Image flip and rotate
• Crop
• Scale

Data Acquisition

• National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

• Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions

Supported File Formats

• Cine RAW & Cine Compressed
• AVI, h.264 mp4
• Apple ProRes .mov
• Multipage TIFF
• MXF PAL & MXF NTSC
• Uncompressed QuickTime
• Windows BMP
• OS/2 BMP, PCX, TGA
• TIFF, LEAD, JPEG
• JTIF, RAW, DNG, DPX

Power

• 100 – 240 VAC, 280 Watt power supply included
• 20 – 28 VDC secondary power input on the back panel

Mechanical Specifications

• 5 x 5 x 8.25 inches, 12.7 x 12.7 x 21 cm (H, W, L) without handle or lens.
• Handle adds 2″(5 cm) to height
• Weight: 9.4 lbs, 4.3 kg

Environmental Specifications

• Operating Temperature: -10 to +50 C
• Storage Temperature: -20 to + 70 C
• Regulatory(EMI/EMC/ESD):
  • Emissions:  EN 61326-1, FCC part 15
  • Immunity: EN 61326-1
• Shock:
  • Operational: 30G, 11mSec sawtooth, 3 axes, 60 pulses total.
• Vibration:
  • Operational:7.5 Grms, 50Hz-2KHz, 3axes, IAW MIL-STD-202H.
• Safety: IEC 60950-1

APIs

• Phantom SDK, C#, C++
• LabView
• MatLab

Ships Standard With

• Power supply 280W w/ XLR cable
• Fischer Ethernet cable
• BNC Cable

Options

• CineMag interface
• FAST Option
• CineMag 5

Popular Accessories

• Case with custom foam
• CineMag 5
• CineStation IV
• Video monitor